Our asbestos rubber sheet is made of asbestos, natural rubber and fillers pressed together. These asbestos rubber plates are available in high, moderate, and low pressures and are resistant to oils, acids, and alkali. The asbestos rubber sheet can serve as a sealing material for pipe flanges, high pressure vessel flanges and other mechanical connection fittings.
Parameters of Asbestos Rubber Sheet
| Model |
NY150, NY200, NY300; NS200, NS300, NS400 |
| Density | 1. 8~2.0g/cm3 |
| Working temperature | 150~500 ℃ |
| Working pressure | 1.5~5Mpa |
| Tensile strength | ≥ 5~15Mpa |
| Loss on ignition | ≤30% |
| Compression ratio | 12±5% |
| Resilience ratio | ≥40% |
| Surface treatment | Graphite coating |
| Internal reinforcement | Steel wire mesh insertion |
| Color | Black, blue, red, green, beige, grey and other customized colors |
| Packaging | Woven bag or pallet |
| Maximum container capacity | 27 tons |
| Minimum order quantity | 3 tons |
| Size of asbestos rubber panel |
4100×1500×(0.4~6.0)mm 2000×1500×(0.4~6.0)mm 1000×1500×(0.4~6.0)mm 3880×1350×(0.4~6.0)mm 1270×1270×(0.4 -6.0)mm |
